Carl's Place DIY Golf Enclosure Kit with Impact Screen
You save $926.91 on the list price
Pickup currently not available
Extra savings at checkout. No code needed.
- $3,000+$100
- $7,500+$300
- $15,000+$750
- Secure checkoutCard, Apple Pay, Google Pay
- Free shippingEvery US order, tracked
- Room questions?Email us before you buy
Get a written quoteSend your room size. We check the fit and reply by email.+
Product details
The Carl's Place DIY Golf Enclosure Kit is for golfers who'd like to build their own simulator bay. It includes steel fittings for a 1 in EMT pipe frame, a cover made of Carl's BlackStop fabric, and an impact screen that reaches right down to the floor. The pipe itself is your choice: add Carl's Pipe Framing Kit as an option, or buy 1 in EMT locally. It comes in six standard sizes, all 59.1 in (1.50 m) deep, with a choice of four screen materials. Carl's Place says it goes together in about an hour.
Choose your size
Carl's size names are simplified height × width figures in feet, so the 7.7x10 is the size that's nominally 10 ft wide. Go by the outer frame measurements below when you check your room, and choose a projector and setting that fill the screen shape; our projector guide shows how to place it.
| Size | Outer frame (W × H, in) | Viewable screen (W × H, in) | Screen shape |
|---|---|---|---|
| 8x8 | 100 × 100 | 86 × 86 | 1:1 (square) |
| 7.7x10 | 124.8 × 95.8 | 110.8 × 83.1 | 4:3 |
| 8x10.5 | 130.3 × 100 | 116.3 × 87.2 | 4:3 |
| 8.5x11.5 | 140.3 × 107.5 | 126.3 × 94.7 | 4:3 |
| 9x12 | 146.3 × 112 | 132.3 × 99.2 | 4:3 |
| 7.7x13 | 163.3 × 95.8 | 149.3 × 84 | 16:9 |
Every size is 59.1 in (1.50 m) deep, measured from the screen to the front of the frame. Carl's Place notes that sizes can vary slightly in manufacturing.
Room check: Carl's Place recommends 12–16 in (30–41 cm) of clear space behind the screen, so nothing touches its back; the rear fittings stick out 8.25 in (21 cm), the absolute minimum. With 12–16 in behind the screen, the kit needs 71.1–75.1 in (1.81–1.91 m) of floor depth, or 67.4 in (1.71 m) at the very least. Leave 2–3 in (5–8 cm) above it and on each side as well, which Carl's Place says you need for assembly. Set the tee at least 10 ft (3.05 m) from the screen; Carl's size guide recommends a room at least 14 ft (4.3 m) wide and 18 ft (5.5 m) deep, with a 9–10 ft (2.7–3.0 m) ceiling. Use new, clean golf balls (never colored ones) and clean clubs, so the screen doesn't scuff or stain. Our room size guide covers the space a full swing needs.
Choose your screen
- Standard: loosely woven polyester, and the lowest-priced of the four.
- Preferred: a tightly woven polyester knit with silicone reinforcement.
- Premium: three layers of polyester, with a noise-damping layer in the middle.
- High-Contrast Gray: the same three-layer material as Premium, in gray.
Features
- Steel corner fittings for a frame of 1 in EMT, which measures 1.163 in (29.5 mm) across the outside
- A cover made of BlackStop, Carl's light-absorbing enclosure fabric, plus five separate flaps
- No border along the bottom of the screen: it comes down to the floor, held by a cable that's already threaded through its bottom sleeve
- Releasable zip ties to fasten the screen to the frame
- Connection points on the cover for Carl's Net Wall Extensions and Back Cover
- A frame diagram drawn for your size
What's in the box
- BlackStop fabric enclosure cover
- 5 detached flaps
- Impact screen in your chosen material, with its bottom cable threaded through
- 2 cable receivers and 2 springs
- Releasable zip ties
- Steel fittings: 2 rear bottom (one left, one right), 2 rear top, 2 front top, 2 front bottom and 7 connectors
- Frame diagram for your size
- With the Pipe Framing Kit option: pre-cut, marked pipes for your size
Not included: the frame pipe (unless you add the Pipe Framing Kit), a hitting mat, launch monitor, projector or computer, and Carl's Foam Insert Kit, Back Cover Kit, Safety Baffles and Net Wall Extensions, which are on our site along with Carl's HotShot Golf Mat System. The VTrack DX10 is a launch monitor that mounts on the ceiling above the hitting area.
Warranty
Carl's Place gives no warranty, as it treats its products as wearable (some wear after the first use is normal). A part that's defective, or made to the wrong size on Carl's side, is replaced free if you contact us within 30 days of delivery with photos and your order number; worn parts, and replacements after 30 days, are charged. The enclosure is designed so that single parts can be replaced. Email us for setup help or if anything isn't working; we bring in Carl's Place's support team when needed.
Questions and answers
Are the pipes included?
Only if you choose the Pipe Framing Kit option, which adds pre-cut, marked pipes for your size. Otherwise you'll need 1 in EMT (see Features); the frame diagram in the kit is drawn for your size. Carl's Place notes that the DIY Pipe Framing Kit isn't made for mounting a projector or launch monitor on the frame; if you want to do that, see the Pro kit.
Is 5 ft deep enough?
Carl's size guide warns that wedges and higher-lofted irons can launch the ball at angles a 5 ft (1.52 m) deep enclosure may not contain. If that matters in your room, the Pro kit is made up to 15 ft (4.57 m) deep, and Carl's Net Wall Extensions add 6, 8 or 10 ft (1.83, 2.44 or 3.05 m) of depth.
Can I hit into the enclosure fabric?
No. The impact screen is what takes the ball; Carl's Place says the enclosure fabric isn't meant to be struck by the ball directly.
How long does assembly take, and what tools do I need?
Carl's Place puts it at about an hour, varying with the size. Its manual lists a wrench or 1/2 in socket, a 3/16 in hex key, a rubber mallet, a tape measure, pliers, a cutting tool and a step ladder.
Can I get a custom size?
Carl's Place also makes this kit to the inch in other sizes, from 96 to 124 in (2.44 to 3.15 m) tall, 96 to 163 in (2.44 to 4.14 m) wide and 24 to 59 in (0.61 to 1.50 m) deep. Custom sizes are priced per order, so email us your measurements and we'll get you a price. If you change or cancel a custom-size order more than 24 hours after placing it, the restocking fee is up to 30%, and custom sizes also carry a restocking fee if they're returned.
Shipping
Free shipping on every US order. Large items can ship by freight, and parts from different makers can arrive on different days. You get a tracking email when each part ships. Shipping policy
Returns
See our refund policy for the return window and conditions. Questions? Email us before you order.
Check the fit first
Every product page lists the maker's room needs. Email us your ceiling, width and depth if you are unsure.
Pay securely
Checkout runs on Shopify. Shipping and tax show before you pay.
Track every box
Large items ship from the maker. You get a tracking email for each part.











